New design, latest technology

THE VDO SMARTTERMINAL – DTCO 4.0 READY

  • Latest-generation stationary reader for DTCO 4.0 data
  • Compatible with all first- and second-generation cards and mass storage devices (Download Key)
  • Data transmission via WiFi, LAN or USB (also as a stand-alone solution with data transmission via USB stick)
  • Complies with the legal requirements for reading and archiving driver and vehicle data
  • 7-inch screen diagonal (approx. 18 cm) with touch display in a modern design
  • Simple wall or table installation in any room (e.g. in the break room)
  • Reliable data protection and data backup
  • Virtually unlimited memory for driver and vehicle data (32 GB of internal memory)
  • With fitting for an anti-theft lock (e.g. Kensington lock)
THE LATEST READER FOR THE DTCO 4.0

THE LATEST READER FOR THE DTCO 4.0

The VDO SmartTerminal is the latest-generation stationary reader for driver and company cards used in the DTCO 4.0. With the VDO SmartTerminal, you are instantly DTCO 4.0-ready. That’s because it has been specially developed for the requirements of the new DTCO 4.0 digital tachograph and accepts all first- and second-generation driver, auto repair shop and company cards. With the VDO SmartTerminal, you meet all legal requirements for reading and archiving driver and vehicle data. Thanks to its 32 GB SD card, the VDO SmartTerminal has almost unlimited capacity for storing this data.

EASY USER GUIDANCE AND ELEGANT DESIGN

EASY USER GUIDANCE AND ELEGANT DESIGN

The VDO SmartTerminal impresses with its elegant design and simple user guidance. If you are already working with TIS-Web®, you will quickly feel at home. The user interface is based on easy-to-use fleet management software. Data transmission is simple. Just insert the card and downloads begin automatically. Visual and audible alerts indicate when an action is required by the user. Practical reminder functions indicate when the last download was completed and when the next is due.  All commands can be entered directly on the 7-inch touchscreen (approximately 18-centimeter screen diagonal).

Whether as a desktop fitting or attached to the wall, the elegant device is easy to set up. No additional brackets are required for wall installation. In just a few steps, you will be guided through the configuration of the device and can get started immediately. The VDO SmartTerminal is also equipped with a fitting for an anti-theft lock (e.g. Kensington lock).

With the DLT Pro download terminal, you can easily perform the required checks on the driver’s licenses of your drivers. Drivers simply have to hold their driver’s licenses with its RFID chip on the DLT Pro. By using the RFID Tag ID references about driver and driving license could be created for example by using TIS-Web.

Your VDO SmartTerminal works best if it is always equipped with the latest software version. You can find regular updates for easy download at www.smartterminal.vdo.com. The latest documentation is also available here.

  • VDO SmartTerminal hardware

     

  • Power supply, 240 V, 3 A, 2 m

  • RJ45 network cable (Ethernet), 2 m

  • USB cable, 2 m

  • Operating manual

  • Card cleaning cloth

  • Cleaning card

  • Windows® 10, Windows® 8 or Windows® 7, with the latest service pack

  • Windows® Server 2019, 2016, 2012

  • 1 free USB port or network connection

  • Processor: min. 1.5 GHz

  • Free hard drive space of approximately 1 GB

  • 2 GB RAM memory

ADDITIONAL PRODUCTS

The data stored on the DLT Pro download terminal can be analyzed and evaluated easily using TIS-Web software. As a fleet manager, the software helps you improve the routes, driving times, utilization and fuel consumption of your fleet. You can also easily download tachograph data using a mobile download key. The well-established DTCO® digital tachograph from VDO forms the basis for secure, efficient and flexible download options.

DTCO® 4.0

DTCO® 4.0

DLK Pro Download Key S

DLK Pro Download Key S

DLKPro TIS-Compact S

DLKPro TIS-Compact S

TIS-Web®

TIS-Web®